MDF Hardboard Sublimation Coat Hanger Rack with Black Edge (9/case)
$204.60
SKU
SB4576CS
We're hung up on our decorative coat hanger! This sublimation-friendly coat hanger offers a large area that is perfect for personalization with a surface area of about 8" x 16". The coat hanger offers three polished silver double hooks as well as vertical keyholes on either end on the reverse side to help firmly secure the coat hanger to the wall. It has an elegant black trim edge and is also available in a natural wood edge for lighter interiors.
Features:- Size: 8" x 16"
- Thickness: 0.625"
- Medium density fiberboard
- Chamfer edge
- Includes 3 silver double hooks
- Bright white sublimation surface
Heat Press Settings:
Temperature: 385ºF
Time: 110 - 140 seconds
Pressure:Â Medium (Swing-away press recommended)
- Print image in reverse
- Check for protective film, and remove if present
- Pre press for 20 seconds, let cool
- Place in heat press with transfer paper face down, and secure with thermal tape
- Press according to above settings
- After pressing, remove paper immediately
These settings are only a recommendation that may vary between different heat presses.
| Manufacturer | Unisub |
|---|---|
| Print Applications | Dye-Sublimation |
| Finish | Gloss |
| Substrate Material | Hardboard |
