Economy White Ceramic Sublimation Coffee Mug - 11 oz. (36/case)
Quantity | 3 cs | 5+ cs |
---|---|---|
Price | $36.81 | $36.05 |
Quantity | Price |
---|---|
3 cs | $36.81 |
5+ cs | $36.05 |
*No additional promotional offers can be used with this offer.
Create vibrant custom mugs that won’t break the bank with these 11 oz. economy ceramic mugs for sublimation! These mugs are a lower-cost alternative to our standard 11 oz. ceramic mugs and are perfect for the cost-conscious customer. Like our standard mugs, they feature the same high-quality poly-coated surface for vivid, full-color transfers and sturdy walls for safe, durable use. There is potential for very slight inconsistencies in the ceramic, which would be the same quality as most other brands "best" series mugs. These inconsistencies could be small pin holes or other slight variations that are barely noticeable to the human eye.
Stock up and save! The economy mugs are available in bulk quantities, and you can save even more when you purchase additional cases.
Specifications:
- Create a personalized mug with dye-sublimation
- 11 oz. economy white ceramic mug for sublimation
- Poly-coated for sublimation
- Microwave and dishwasher safe
- Lead free
- For use with a mug press or a sublimation mug wrap
4-in-1 Mug Press
Press Temperature: 370°F
Time: 250 Seconds
Pressure: Medium/Firm
- Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
- Place mug in press at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
GeoKnight DK3
Press Temperature: 400°F
Time: 6 - 7 Minutes (for solid, white, 11oz. mug only)
Pressure: Medium/Firm
- Attach sublimation transfer paper with image printed in reverse to the coffee mug with thermal tape
- Place mug in heat press at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
Mug Master Pro Mug Press
Idle Temperature: 390°F
Press Temperature: 395°F
Time: 180 - 200 Seconds
Pressure: Firm
- Tape the sublimation paper with image printed in reverse to the mug with thermal tape
- When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
- Place the coffee mug in the element and close it by pulling the handle towards you
- Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
- Once the press temperature is reached, the timer will begin counting down
- When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
Oven Settings
Press Temperature: 400°F
Time: 12 - 15 Minutes
(test in your oven for accurate time)
- Attach reversed printed image to mug with thermal tape
- Wrap silicone wrap around mug surface and clasp at handle
- Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!)
- Afterwards, remove wrap and transfer immediately
- Allow the mug to cool completely before use
We highly recommend testing your press/oven for proper settings before going to full production.
Manufacturer | Coastal |
---|---|
Print Applications | Dye-Sublimation |
Color | White |
Substrate Material | Ceramic |