Stainless Steel Sublimation Cola Bottle - 17oz.

Only %1 left

Quench your customers' thirst for super trendy, personalized bottles. These fashion-forward sublimation water bottles are made of a durable stainless steel construction and keep drinks cold (and hot) for extended periods of time. Print long-lasting designs that come to life on their premium sublimation coating.


  • Sturdy stainless steel water bottles for dye sublimation
  • Capacity: 17oz. (500ml)
  • Available in two base colors: white and natural silver
  • Trendy, coke-shaped design
  • For use with a Mug Press, or 7" x 11" / 13" x 8" Heat Shrink Bags, in an oven

Helpful Resources

Note: Be sure to remove the lid before pressing!

4-in-1 Mug Press:

Press Temperature: 320°F
Time: 170 Seconds
Pressure: Light/Medium

  • Attach sublimation transfer paper with image printed in reverse to the bottle with thermal tape
  • Place bottle in press at the press temperature, and close the element around the bottle
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the bottle from the press and remove the transfer paper immediately
  • Allow the water bottle to cool completely before use

Oven Instructions:
(test in your oven for accurate time)

  • Attach reversed printed image to tumbler with thermal tape
  • Place tumbler in heat shrink bag or silicone wrap
  • Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
  • Afterwards, remove heat shrink bag and paper immediately
  • Allow the tumbler to cool completely before use
More Information
Manufacturer Coastal
Print Applications Dye-Sublimation
Substrate Material Stainless Steel