White Stainless Steel Straw Top Sublimation Water Bottle - 20oz. (60/case) - OVERSTOCK

Special Price $275.00 Regular Price $359.95
SKU
27873

If you are looking for long lasting sublimation blanks, our stainless steel water bottles are unbeatable. The stainless steel construction is tough, being able to withstand more pressure in a mug press than aluminum. Choose from white or silver base colors, finished with premium sublimation coating for rich and exciting pigments! The straw cap is comfortable and spill-proof, great for a quick drink while on the move. Perfect for working out, cycling, hiking or anybody that needs to be in an upright position.

Specifications:

  • Sturdy stainless steel water bottles for dye sublimation
  • Capacity: 20oz. (600ml)
  • Dimensions: 2.87"w x 7.83"h (9.69" with lid)
  • Available in: White
  • For use with a Mug Press or Water Bottle Wrap

Helpful Resources

Note: Be sure to remove the cap and straw before pressing!

Mug Master Pro Mug Press

Idle Temperature: 275°F
Press Temperature: 330°F
Time: 15 Seconds
Pressure: Medium

(Use the water bottle element in the mug press for this item!)

  • Tape the sublimation paper with image printed in reverse to the water bottle with thermal tape
  • When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
  • Place the water bottle in the element and close it by pulling the handle towards you
  • Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
  • Once the press temperature is reached, the timer will begin counting down
  • When the timer reaches 0, take out the water bottle from the press and remove the transfer paper immediately
  • Allow the water bottle to cool completely before use


GeoKnight DK3

Press Temperature: 400°F
Time: 3 Minutes
Pressure: Medium

  • Attach sublimation transfer paper with image printed in reverse to the water bottle with thermal tape
  • Place water bottle in heat press at the press temperature, and close the element around the water bottle
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
  • Once done, remove the water bottle from the press and remove the transfer paper immediately
  • Allow the water bottle to cool completely before use


4-in-1 Mug Press

Press Temperature: 320°F
Time: 150 - 180 Seconds
Pressure: Medium/Firm

  • Attach sublimation transfer paper with image printed in reverse to the bottle with thermal tape
  • Place bottle in press at the press temperature, and close the element around the bottle
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the bottle from the press and remove the transfer paper immediately
  • Allow the water bottle to cool completely before use


Oven Settings

Press Temperature: 400°F
Time: 6 - 10 Minutes
(test in your oven for accurate time)

  • Attach reversed printed image to water bottle with thermal tape
  • Wrap silicone wrap around water bottle surface and clasp at handle
  • Place in oven preheated to 400°F for approximately 6 - 10 minutes (test to determine best timing!)
  • Afterwards, remove wrap and transfer immediately
  • Allow the water bottle to cool completely before use

More Information
Manufacturer Coastal
Print Applications Dye-Sublimation, Silicone Wrap
Finish Gloss
Color White
Substrate Material Stainless Steel