White Plastic Sublimation Travel Mug - 15oz.
Only %1 left
SKU
T1536-G
With our white plastic travel mugs for custom sublimation printing, you can have the crisp and brilliant color of sublimation on a durable, lightweight mug. Our travel mugs are made of plastic that will withstand the temperature required for sublimation transfer. Use the aluminum insert tool to make sure the shape is retained. These mugs are tough enough for children, picnics, and everyday use!
Specifications:
- Plastic travel mug for customization and sublimation
- Capacity: 15oz.
- White finish and lightweight build
- For use with a Mug Press and Aluminum Insert Tool to keep the shape intact
Helpful Resources
Note: Be sure to remove the lid before sublimating!
BJ870 - 4-in-1 Mug Press. 11oz/15oz element
Print image in reverse
Place image onto mug, and secure with thermal tape
Place metal insert into mug (You can pre heat insert prior, if needed)
Press Temperature: 330°F
Time: 220-240 Seconds
Pressure: Medium
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
- Tape the sublimation paper with image printed in reverse to the mug with thermal tape
- When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
- Place the mug, with insert tool in place, in the element and close it by pulling the handle towards you
- Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
- Once the press temperature is reached, the timer will begin counting down
- When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
- Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
- Place mug in heat press, with insert tool in place, at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
Mug Master Pro Mug Press
Idle Temperature: 230°FPress Temperature: 330°F
Time: 90 Seconds
Pressure: Medium
GeoKnight DK3
Press Temperature: 390°FTime: 4 Minutes
Pressure: Medium
| Manufacturer | Coastal |
|---|---|
| Print Applications | Dye-Sublimation |
| Finish | Gloss |
| Color | White |
| Substrate Material | Plastic |
