Metallic Gold Ceramic Sublimation Coffee Mug - 11oz.
Only %1 left
SKU
21167-C
These attention grabbing coffee mugs come in three metallic colors that are coated for fantastic dye sublimation results! Print and press lettering and logos that are bright and bold and take on the shimmer of silver, gold or metallic pink. These are best for darker designs or unique logos that do not require a white base.
Specifications:
- Glossy ceramic mugs with metallic finish for dye sublimation
- Capacity: 11oz.
- Available in three colors: metallic silver, metallic gold, metallic pink
- Hand wash only. Not microwave safe
- Lead free
- For use with a Mug Press or a Mug Wrap
Helpful Resources
Mug Master Pro Mug Press
Idle Temperature: 390°FPress Temperature: 395°F
Time: 180 - 200 Seconds
Pressure: Firm
- Tape the sublimation paper with image printed in reverse to the mug with thermal tape
- When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
- Place the coffee mug in the element and close it by pulling the handle towards you
- Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
- Once the press temperature is reached, the timer will begin counting down
- When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
GeoKnight DK3
Press Temperature: 400°FTime: 3 - 4 Minutes
Pressure: Medium/Firm
- Attach sublimation transfer paper with image printed in reverse to the coffee mug with thermal tape
- Place mug in heat press at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
4-in-1 Mug Press
Press Temperature: 370°FTime: 250 Seconds
Pressure: Medium/Firm
- Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
- Place mug in press at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
Oven Settings
Press Temperature: 400°FTime: 12 - 15 Minutes
(test in your oven for accurate time)
- Attach reversed printed image to mug with thermal tape
- Wrap silicone wrap around mug surface and clasp at handle
- Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!)
- Afterwards, remove wrap and transfer immediately
- Allow the mug to cool completely before use
Manufacturer | Coastal |
---|---|
Print Applications | Dye-Sublimation, Silicone Wrap |
Finish | Metallic |
Color | Gold |
Substrate Material | Ceramic |
We found other products you might like!
-
Frosted Glass Sublimation Mug - 11oz. (36/case) - OVERSTOCKSpecial Price $55.00 Regular Price $94.95