Clear Glass Sublimation Beer Stein - 16oz. (2/pack)
$17.95
SKU
22337-2
Clear glass beer steins are classic and sturdy, made from thick transparent glass prepared for sublimation printing. The transparency of the material will give any colored design a subtle effect that can change depending on what liquid is inside the stein. Restaurants, bars and private parties can all benefit from custom beer steins!
Specifications:
- Clear glass beer steins coated for sublimation printing
- Capacity: 16oz.
- Dimensions: 3.15" x 5.90"
- For use with a Mug Press
Helpful Resources
Note: For best results we highly recommend pre pressing the mug for 10-15 seconds
Press Temperature: 360°F
Time: 280 Seconds
Pressure: Medium
Time: 7 Minutes
Pressure: Light/Medium
Time: 240 Seconds
Pressure: Medium/Firm
Mug Master Pro Mug Press
Idle Temperature: 300°FPress Temperature: 360°F
Time: 280 Seconds
Pressure: Medium
- Tape the sublimation paper with image printed in reverse to the stein with thermal tape
- When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
- Place the stein in the element and close it by pulling the handle towards you
- Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
- Once the press temperature is reached, the timer will begin counting down
- When the timer reaches 0, take out the stein from the press and remove the transfer paper immediately
- Allow the stein to cool completely before use
GeoKnight DK3
Press Temperature: 380°FTime: 7 Minutes
Pressure: Light/Medium
- Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
- Place stein in heat press at the press temperature, and close the element around the stein
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the stein from the press and remove the transfer paper immediately
- Allow the stein to cool completely before use
4-in-1 Mug Press
Press Temperature: 360°FTime: 240 Seconds
Pressure: Medium/Firm
- Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
- Place stein in press at the press temperature, and close the element around the stein
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
- Once done, remove the stein from the press and remove the transfer paper immediately
- Allow the stein to cool completely before use
| Manufacturer | Coastal |
|---|---|
| Print Applications | Dye-Sublimation |
| Finish | Gloss |
| Color | Clear |
| Substrate Material | Glass |
