B-Flex Five Print - Printable Heat Transfer Vinyl (Semi Gloss)
Discover the versatility and convenience of B-Flex FIVE PRINT Semi-Gloss (BFPRINT00)! This polyurethane white opaque film is specially designed to be printable with solvent, eco-solvent, and latex inks, making it ideal for a variety of printing projects. But the magic doesn't stop there! This innovative product allows for heat transfer in ONLY 4 SECONDS, saving you precious time and increasing your productivity tenfold.
Thanks to its self-adhesive PET film carrier, even the tiniest letters and logos can be precisely cut by all current cutting plotters following the printing process. No design is too intricate or detailed!
We recommend coupling the Five Print with B-Flex's trusted BF MYLAR transfer tape. Not only does it support an effortless transfer, but it also serves as a protective layer during the heat transfer process. You can then conveniently remove it while it's still hot.
Features:
- Semi Gloss
- It applies in just 4 seconds at 140°C/285°F
- Lasts over 100 wash cycles at 90°C/194°F
- PVC Free
- CPSIA Certified as safe for use on children’s garments and accessories
- Compatible with cotton fabrics, polyester and acrylic garments
- Works great with other B-Flex products and can be used for multi-color layering vinyl applications
Specifications:
- 80 microns available in a gloss and matte finish
- Pressure: Medium - 3,5 bar - 50 PSI
- Recommended for use with a 45-degree blade
- Wait at least 8 hours after printing, before proceeding with cutting.
- Can be stored in a dark/dry/cool area for up to 1 year (best results)
- For best washing results, run garments through washer inside out and hang dry
Adheres to:
100% Cotton
100% Polyester
Poly/Cotton Blends
Cutting Instructions
Cut Settings: Do not mirror
Graphtec
Blade: 45 degree
Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
Silhouette Cameo 4
Blade: Standard 2
Material: Heat Transfer, Smooth
Speed: 5
Force: 14
Pass: 1
Brother ScanNCut
Blade: Standard 2
Speed: 1
Pressure: 4
Application Instructions
Wait at least 8 hours after printing, before cutting
Mask with BF Mylar
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
Preheat garment for 2 - 3 seconds
Apply design at 140°C / 285°F
Use light/medium pressure (3,5 bar - 50 PSI) for 4 seconds
Peel carrier hot
Washing Instructions
Wait 12 hours before first wash
Maximum washing temperature: 90°C /194°F
Dry on normal dryer setting, or hang dry
Do not dry clean, use bleach, or fabric softener
Adheres to:
100% Cotton
100% Polyester
Poly/Cotton Blends
Cutting Instructions
Cut Settings: Do not mirror
Graphtec
Blade: 45 degree
Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
Silhouette Cameo 4
Blade: Standard 2
Material: Heat Transfer, Smooth
Speed: 5
Force: 14
Pass: 1
Brother ScanNCut
Blade: Standard 2
Speed: 1
Pressure: 4
Application Instructions
Wait at least 8 hours after printing, before cutting
Mask with BF Mylar
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
Preheat garment for 2 - 3 seconds
Apply design at 140°C / 285°F
Use light/medium pressure (3,5 bar - 50 PSI) for 4 seconds
Peel carrier hot
Washing Instructions
Wait 12 hours before first wash
Maximum washing temperature: 90°C /194°F
Dry on normal dryer setting, or hang dry
Do not dry clean, use bleach, or fabric softener
Manufacturer | B-Flex |
---|---|
Print Applications | Eco Solvent |
Compatible Fabric Color | White/Light Colors, Dark/Colors |
Compatible Fabric | Cotton, Polyester |