Clear Glass Sublimation Beer Stein - 16oz.

SKU
22337-C

Clear glass beer steins are classic and sturdy, made from thick transparent glass prepared for sublimation printing. The transparency of the material will give any colored design a subtle effect that can change depending on what liquid is inside the stein. Restaurants, bars and private parties can all benefit from custom beer steins!

Specifications:

  • Clear glass beer steins coated for sublimation printing
  • Capacity: 16oz.
  • For use with a Mug Press

Helpful Resources

Note: For best results we highly recommend pre pressing the mug for 10-15 seconds

Mug Master Pro Mug Press

Idle Temperature: 300°F
Press Temperature: 360°F
Time: 280 Seconds
Pressure: Medium

  • Tape the sublimation paper with image printed in reverse to the stein with thermal tape
  • When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
  • Place the stein in the element and close it by pulling the handle towards you
  • Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
  • Once the press temperature is reached, the timer will begin counting down
  • When the timer reaches 0, take out the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use


GeoKnight DK3

Press Temperature: 380°F
Time: 7 Minutes
Pressure: Light/Medium

  • Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
  • Place stein in heat press at the press temperature, and close the element around the stein
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
  • Once done, remove the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use


4-in-1 Mug Press

Press Temperature: 360°F
Time: 240 Seconds
Pressure: Medium/Firm

  • Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
  • Place stein in press at the press temperature, and close the element around the stein
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use

More Information
Manufacturer Coastal
Color Clear
Substrate Material Glass
Finish Gloss
Print Applications Dye-Sublimation