16 oz. Color Frosted Glass Beer Mug with Handle - Black

Only %1 left
SKU
22332-C

Add a touch of color with these 16oz. black gradient, high-quality thick glass, beer mugs!  This beer mug is perfect for displaying drinks, spirits, and more. It will make a great addition to any home bar or restaurant. The beautiful black ombre gradient gives it a unique and stylish look that can't be found anywhere else. With its thick construction, this mug is built to last! 

Specifications:

  • Material: glass
  • Color: Frosted White, Black bottom 
  • Capacity: 480 ml (16 oz.) 
  • Mug Press recommended
  • Not dishwasher or microwave safe

Note: For best results we highly recommend pre pressing the mug for 10-15 seconds

Settings are based on in house testing and equipment. Additional testing is recommended.

 

4-in-1 Mug Press

Press Temperature: 360°F
Time: 240 Seconds
Pressure: Medium/Firm

  • Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
  • Place stein in press at the press temperature, and close the element around the stein
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use

 

Mug Master Pro Mug Press

Idle Temperature: 300°F
Press Temperature: 360°F
Time: 280 Seconds
Pressure: Medium

  • Tape the sublimation paper with image printed in reverse to the stein with thermal tape
  • When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
  • Place the stein in the element and close it by pulling the handle towards you
  • Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
  • Once the press temperature is reached, the timer will begin counting down
  • When the timer reaches 0, take out the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use



GeoKnight DK3

Press Temperature: 380°F
Time: 7 Minutes
Pressure: Light/Medium

  • Attach sublimation transfer paper with image printed in reverse to the stein with thermal tape
  • Place stein in heat press at the press temperature, and close the element around the stein
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
  • Once done, remove the stein from the press and remove the transfer paper immediately
  • Allow the stein to cool completely before use
More Information
Manufacturer Coastal
Print Applications Dye-Sublimation, Heat Transfer Paper
Finish Matte
Color Black
Substrate Material Glass