Black Ceramic Sublimation Coffee Mug with Printable White Area - 11oz.

*Printable Area: 7.5" x 3.25"

Mug Master Pro Mug Press

Idle Temperature: 390°F
Press Temperature: 395°F
Time: 180 - 200 Seconds
Pressure: Firm

• Tape the sublimation paper with image printed in reverse to the mug with thermal tape
• When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
• Place the coffee mug in the element and close it by pulling the handle towards you
• Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
• Once the press temperature is reached, the timer will begin counting down
• When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
• Allow the mug to cool completely before use

GeoKnight DK3

Press Temperature: 400°F
Time: 3 - 4 Minutes
Pressure: Medium/Firm

• Attach sublimation transfer paper with image printed in reverse to the coffee mug with thermal tape
• Place mug in heat press at the press temperature, and close the element around it
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
• Once done, remove the mug from the press and remove the transfer paper immediately
• Allow the mug to cool completely before use

4-in-1 Mug Press

Press Temperature: 370°F
Time: 250 Seconds
Pressure: Medium/Firm

• Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
• Place mug in press at the press temperature, and close the element around it
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
• Once done, remove the mug from the press and remove the transfer paper immediately
• Allow the mug to cool completely before use

Oven Settings

Press Temperature: 400°F
Time: 12 - 15 Minutes
(test in your oven for accurate time)

• Attach reversed printed image to mug with thermal tape
• Wrap silicone wrap around mug surface and clasp at handle
• Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!)
• Afterwards, remove wrap and transfer immediately
• Allow the mug to cool completely before use