B-Flex BF Print Fatty Printable Vinyl - 20" x 11 Yards

$178.99
SKU
BFPTFT2011

Are you tired of designs that lack texture and depth? Look no further than B-Flex BF PRINT FATTY, the polyurethane heat transfer film that will elevate any fabric decoration.

Whether you're working with t-shirts, sports uniforms, or work attire, B-Flex BF PRINT FATTY is the solution for adding an extra dimension to your designs. Thanks to its sticky carrier, cutting small letters and drawings has never been easier.

Compatible with solvent, eco-solvent, and latex based inks, this versatile film is a game-changer for any designer looking to up their game. Say goodbye to flat, lackluster designs, and hello to texture and dimension with B-Flex BF PRINT FATTY.

Features:

  • It applies in just 15 seconds at 150°C/305°F
  • Lasts over 100 wash cycles at 40°C/104°F
  • PVC Free
  • CPSIA Certified as safe for use on children’s garments and accessories
  • Compatible with organic, synthetic, and mixed
  • Works great with other B-Flex products and can be used for multi-color layering vinyl applications

Specifications:

  • 750 microns with an opaque finish
  • Pressure: Medium-Low - 2,0 bar - 30 PSI
  • Recommended for use with a 60-degree blade
  • Wait at least 8 hours after printing, before proceeding with cutting.
  • Can be stored in a dark/dry/cool area for up to 1 year (best results)
  • For best washing results, run garments through washer inside out and hang dry

Adheres to:

    100% Cotton

    100% Polyester

    Poly/Cotton Blends

Cutting Instructions

    Cut Settings: Do not mirror

    Graphtec

    Blade: 60 degree

    Force: 12

    Tool: CB09+0

    Speed: 25 cm/s

Application Instructions

    Wait at least 8 hours after printing, before cutting

    Mask with BF Mylar

    Cover with Heat Transfer Cover Sheet or Multipurpose Paper

    Preheat garment for 2 - 3 seconds

    Apply design at 150°C / 305°F

    Use light/medium pressure (2,0 bar - 30 PSI) for 15 seconds

    Peel carrier hot

Washing Instructions

    Wait 12 hours before first wash

    Maximum washing temperature: 40°C /104°F

    Dry on normal dryer setting, or hang dry

    Do not dry clean, use bleach, or fabric softener

More Information
Manufacturer B-Flex
Print Applications Latex, Eco Solvent
Roll Length 11 Yards
Roll Width 20" wide