B-Flex Print UV Printable Heat Transfer Vinyl
Find a different use for your UV Printer! The BF PRINTUV is a polyurethane printable film, made specifically for UV inks. The adhesive line guarantees ease of work during all phases, including printing and weeding.
After cutting and weeding BF PRINT UV, it can be positioned on the garment using BF MYLAR, which will then be removed hot.
Due to the nature of UV inks, you can cut BF PRINTUV and apply it immediately after printing!
Features:
- It applies in just 10 seconds at 140°C/285°F
- Lasts over 100 wash cycles at 40°C/104°F
- PVC Free
- CPSIA Certified as safe for use on children’s garments and accessories
- Compatible with organic, polyester, and mixed
- Works great with other B-Flex products and can be used for multi-color layering vinyl applications
Specifications:
- Polyurethane composition on a pressure-sensitive carrier (cannot be re-adhered to carrier backing once vinyl has been pulled away)
- 80 microns with a matte finish
- Pressure: Medium - 3,5 bar - 50 PSI
- Recommended for use with a 45-degree blade
- Wait at least 8 hours after printing, before proceeding with cutting
- Can be stored in a dark/dry/cool area for up to 1 year (best results)
- For best washing results, run garments through washer inside out and hang dry
Adheres to:
100% Cotton
100% Polyester
Poly/Cotton Blends
Cutting Instructions
Cut Settings: Do not mirror
Graphtec
Blade: 45 degree
Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
Silhouette Cameo 4
Blade: Standard 2
Material: Heat Transfer, Smooth
Speed: 5
Force: 14
Pass: 1
Brother ScanNCut
Blade: Standard 2
Speed: 1
Pressure: 4
Application Instructions
Wait at least 8 hours after printing, before cutting
Cut, and mask with BF Mylar
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
Preheat garment for 2 - 3 seconds
Apply design at 140°C / 285°F
Use light/medium pressure (3,5 bar - 50 PSI) for 10 seconds
Peel carrier hot
Washing Instructions
Wait 12 hours before first wash
Maximum washing temperature: 40°C /104°F
Dry on normal dryer setting, or hang dry
Do not dry clean, use bleach, or fabric softener
Adheres to:
100% Cotton
100% Polyester
Poly/Cotton Blends
Cutting Instructions
Cut Settings: Do not mirror
Graphtec
Blade: 45 degree
Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
Silhouette Cameo 4
Blade: Standard 2
Material: Heat Transfer, Smooth
Speed: 5
Force: 14
Pass: 1
Brother ScanNCut
Blade: Standard 2
Speed: 1
Pressure: 4
Application Instructions
Wait at least 8 hours after printing, before cutting
Cut, and mask with BF Mylar
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
Preheat garment for 2 - 3 seconds
Apply design at 140°C / 285°F
Use light/medium pressure (3,5 bar - 50 PSI) for 10 seconds
Peel carrier hot
Washing Instructions
Wait 12 hours before first wash
Maximum washing temperature: 40°C /104°F
Dry on normal dryer setting, or hang dry
Do not dry clean, use bleach, or fabric softener
| Manufacturer | B-Flex |
|---|---|
| Print Applications | Eco Solvent |
| Finish | Matte |
| Compatible Fabric Color | White/Light Colors, Dark/Colors |
| Compatible Fabric | Cotton, Polyester |
