OVERSTOCK - 8.4" x 11"Siser EasyColor DTV 10 sheets/Pack

Cricut:

• Blade: AutoBlade
• Setting: Heat Transfer

Silhouette Cameo:

• Blade: AutoBlade 3
• Material: Heat Transfer, Smooth
• Speed: 8
• Force: 15

Scan N Cut:

• Blade: Standard, 2
• Cut Speed: 1
• Cut Pressure: 1

Roland GS/GX-24:

• Blade: 45°
• Gram Force: 80-90
• Speed: 30-50 cm/s

Graphtec:

• Blade: 45°
• Gram Force: 8-9
• Tool: CB09U+0
• Speed: 30 cm/s

Heat Press (Strongly Recommended)

• Print, Cut, and Weed material
• Cover with silicone or protective sheet
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C
• Use medium/firm pressure for 15 seconds
• Peel carrier hot

Home Iron

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier hot

Recommended Accessories

• Vinyl Weeder
• Squeegee
• Multipurpose Paper or
• Kraft Paper or
• Heat Transfer Cover Sheet

Laundering

• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Do not bleach or dry clean
• Hang item to dry or dry on low setting