White Stainless Steel Sublimation Coffee Mug with Lid - 10oz.
Only %1 left
SKU
27885-C
Travel with your high-quality stainless steel 10oz. mug! These metal sublimation mugs feature a glossy surface that provides vibrant colors and lids to protect your drink from spilling. They're the perfect addition to every kitchen and desk, and they are great for individual customers, businesses and as promotional giveaways.
Specifications:
- Personalize with dye-sublimation
- Capacity: 10oz.
- 10.25"Cx4.25"Hx3.5"D
- Stainless steel inner wall to keep contents hot or cold
- Food grade material; BPA free
- For use with Mug Press, Heat Shrink Bags or a Mug Wrap
Helpful Resources
Note: Be sure to remove the lid before sublimating!
Time: 200 seconds
Pressure: Light
Time: 5 - 7 minutes
(test in your oven for accurate time)
4-in-1 Mug Press
Press Temperature: 330°FTime: 200 seconds
Pressure: Light
- Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
- Place mug in press at the press temperature, and close the element around the mug (to be used with an 11oz/15oz element)
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the mug from the press and remove the transfer paper immediately
- Allow the mug to cool completely before use
Oven Settings
Temperature: 395°FTime: 5 - 7 minutes
(test in your oven for accurate time)
- Attach reversed printed image to mug with thermal tape
- Place mug in heat shrink bag or silicone wrap
- Place in oven preheated to 395°F for approximately 5 - 7 minutes (test to determine best timing!)
- Afterwards, remove the heat shrink bag / wrap and transfer immediately
- Allow the mug to cool completely before use
| Manufacturer | Coastal |
|---|---|
| Print Applications | Dye-Sublimation, Silicone Wrap |
| Finish | Gloss |
| Color | White |
| Substrate Material | Stainless Steel |
10ozMugwLid.ai
(81.66 kB)
10ozMugwLid.psd
(784.47 kB)
