PolySteel Stainless Steel Sublimation Tumbler - 15oz.

Only %1 left

Create high-quality, personalized tumblers with our 450 ml stainless steel sublimation tumblers! These tumblers feature a stainless steel inner tank encased in a polymer outer wrap for rich, full color transfers and a durable, premium feel.


  • Stainless steel sublimation tumbler blanks
  • Capacity: 15oz.
  • Printable polymer outer wrap
  • Stainless steel inner tank
  • Can contain cold or hot beverages
  • Food grade material, BPA free
  • For use with a Mug Press AND Aluminum Insert Tool, or Silicone Wrap
*If you are using a mug press, the Aluminum Insert Tool IS required!

Helpful Resources

Note: Use the Latte Element for this item! Remove all accessories prior to pressing. 

4-in-1 Mug Press

Press Temperature: 320°F
Time: 180 Seconds
Pressure: Light

  • Pre heat jig to 320F
  • Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
  • Place pre heated Aluminum Insert Tool into tumbler
  • Place tumbler in press at the press temperature, and close the element around the tumbler
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the tumbler from the press and remove the transfer paper immediately
  • Allow the tumbler to cool completely before use

Oven Settings

Press Temperature: 400°F
Time: 5 - 6 Minutes
(test in your oven for accurate time)

  • Attach reversed printed image to tumbler with thermal tape
  • Place tumbler in silicone wrap
  • Place in oven preheated to 400°F for approximately 5 - 6 minutes (test to determine best timing!)
  • Afterwards, remove silicone wrap and paper immediately
  • Allow the tumbler to cool completely before use


More Information
Manufacturer Coastal
Print Applications Dye-Sublimation, Silicone Wrap
Color White
Substrate Material Polymer