|
| |
|
for InkJet Printers
Tips for Best Results
1. Use 100% COTTON or POLY/COTTON fabrics.
2. Do not apply to dark colored fabrics.
3. Do not image this paper in any laser printers or Color Laser Copiers (For use in InkJet ONLY)
DO NOT USE A HP DESKJET 1200C OR 1600C PRINTER
4. Set Printer to: A) T-Shirt transfer reverse image. B) Normal image quality. DO NOT oversaturate with ink.
5. Allow the image to dry for approximately 15 minutes before transferring.
6. Trim close to the image.
If Using a Commercial Heat Press
1. Set the heat press to 350-375 degress F.
2. Use medium to heavy pressure.
3. Press for 10-15 seconds only.
4. Peel paper while still hot.
If Using a Home Iron
1. It is best to do the ironing on a smooth, hard, non-porous surface. Fold a pillowcase in half and place it on top of the ironing surace. Make sure the ironing area is smooth and free from wrinkles.
2. Set the iron to the hottest setting (cotten or linen).
3. DO NOT ADD WATER TO THE IRON and make sure the steam setting is turned off.
4. Allow the iron to preheat for 5 minues.
5. Iron the entire paper for 10 seconds to tack your image down.
6. Then place the iron in one corner, Press down firmly while slightly moving the iron back and forth along the edge of the paper for at least 30 seconds.
Washing Instructions
1. Wash in cold water with mild detergent and no bleach.
2. Turn the shirt inside out before washing.
3. Remove the washed garment immediately form the spin cycle of the washer. DO NOT LEAVE in washer for any extended period of time.
4. Tumble dry the garment using low heat.
|
|
|
|
SHIPPING
|
|
|
|
|
|
PAYMENT TYPES
|
|
|
|
|
|
