J-Eco Subly Nano Sublimation Ink

J-ECO SUBLY NANO NS-60 ENVIRONMENTALLY-FRIENDLY NANO DISPERSED DYE DIGITAL INK FOR SUBLIMATION PRINTING **TESTED AND APPROVED BY MUTOH!**

J-Eco Subly Large Format Sublimation inks are formulated for 42" printers and wider.

J-Eco Subly NANO NS-60 are ink-jet printing inks especially designed to be used on digital printers having piezo printing heads. They are particularly suitable for digital printing on polyester textiles used in sports and outer wear, as well as for a variety of plastic substrates used in the manufacturing of skis, snowboards, skateboards, windsurfs, and other products. The image is printed on coated paper and then transferred (heating temperature around 210 degrees C) on polyester fabrics, or mixed synthetic fabrics containing polyester in a min. quantity of 60%.

For the application on plastic materials, such as polyamide, the transfer temperature varies according to the type of substrate and its chemical-physical characteristics. For instance, the plastic sheets used in skis and snowboards manufacturing are transferred at 170-180 degrees C for 90/120 seconds.

Eco Compatibility:
Free from Alkylphenolethoxylate (APE) according to the EC Directive 2003/53/CE issued on June 18, 2003. APE is a chemical product included in the EDC (Endocrine Disrupting Chemicals) list of substances.

Main Features:

Innovative Nanodot Technology

Vibrant and bright colors

Very good shelf-life

Optimal ink fluidity and printability through piezo-heads

Fast drying on substrates dedicated to transfer

Very good release on paper and image definition after transfer

Very good fastness properties

Applications:

Printing on polyester and polyammid (lycra, nylon) fabrics used in sportswear and outer wear in general

Printing on mixed synthetic fabrics (min. 60% of synthetic fibres) used in sportswear and outer wear in general

Printing on plastic substrates used in the manufacturing of sport equipment such as skis, snowboards, skateboards, windsurfs etc.

Printing on every substrates (wood, ceramics, glass) overprinted with polyester-based or polyammid-based coatings.

Transfer Condition:
Can vary from 30 to 60 seconds for 180-210 degrees C according to the type of substrate

Available Colors:

100C Cyan

101LC Light Cyan

102B Blue

105CT Turquoise

200M Magenta

201LM Light Magenta

203O Orange

205EM Extra Magenta

300Y Yellow

400K Black

4LK Light Black

410LLK Light Light Black

403HK High Black

405AK Absolute Black

406KX Extra Black

500G Green

Important: We strongly suggest that the user always carry out printing, drying and transfer pretests on the substrate to be printed on in order to establish the operative conditions and the results to be achieved. We also suggest that the product be stirred before use and that the instructions written on the label and on the material safety data sheet enclosed to the products be carfully followed. Furthermore, we remind you that ink performances can vary according to the type of printer, paper and polyester fabric used in the final application.

Note: The information contained in this information sheet is based on our present experience and knowledge. In consideration of the various factors which can affect the results achieved in the final application, J-Teck3 Srl does not take any responsibility for an improper use of the product by the user which can violate or damage rights of third parties.

The information contained herein is general in nature and believed to be correct at the time of writing. No responsibility will be accepted by J-Teck3 Srl for any loss or damage suffered by anyone as a result of the information contained herein.