Frosted Fairy Light Sublimation Mason Jar
These sublimation mason jar lights feature a solar lid insert that includes a string of fairy lights, the lid, and a handle. The jar itself is frosted and coated for sublimation. The solar lid determines when it is dark or light out and automatically turns the lights on or off when powered by a AAA battery.
Each of the lanterns features a strong hemp rope attached to the lid allowing you to hang them any place you like. These add great ambiance to outdoor areas, weddings, parties, and many more special occasions.
Specifications:
- 5.25"H 10" circumference x 2.5"D
- Imprintable area: 3.5"Hx10"
- Frosted jar
- AAA battery required
- Solar sensor detects light and dark and turns lights on automatically
- Rope handle connects under lid
4-in-1 Mug Press - 11oz /15oz element:
Press Temperature: 340°F
Time:Â 240 Seconds
Pressure:Â Light
- Attach sublimation transfer paper with image printed in reverse to the jar with thermal tape
- Place jar in press at the press temperature, and close the element around it
- Press for the specified time above, using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
- Once done, remove the jar from the press and remove the transfer paper immediately
- Allow the jar to cool completely before use
Mug Master Pro Mug Press:
Idle Temperature: 380°F
Press Temperature: 385°F
Time:Â 200 - 220 Seconds
Pressure:Â Light
- Tape the sublimation paper with image printed in reverse to the jar with thermal tape
- When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
- Place the jar in the element and close it by pulling the handle towards you
- Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
- Once the press temperature is reached, the timer will begin counting down
- When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
- Allow the jar to cool completely before use
GeoKnight DK3
Press Temperature: 400°F
Time:Â 3 - 4 Minutes
Pressure:Â Light
- Attach sublimation transfer paper with image printed in reverse to the jar with thermal tape
- Place jar in heat press at the press temperature, and close the element around it
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the jar from the press and remove the transfer paper immediately
- Allow the jar to cool completely before use
Â
Oven Settings
Press Temperature: 400°F
Time:Â 12 - 15 Minutes
(test in your oven for accurate time)
- Attach reversed printed image to jar with thermal tape
- Wrap silicone wrap around jar surface and clasp
- Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!)
- Afterwards, remove wrap and transfer immediately
- Allow the jar to cool completely before use
| Manufacturer | Coastal |
|---|---|
| Print Applications | Dye-Sublimation, Heat Transfer Paper |
| Finish | Matte |
| Substrate Material | Glass |
