CPE15P5001

Colorprint Extra is a printable digital material is designed for use with your printer/cutter to create full color transfers that can be applied to a wide variety of items with a heat press, including nylon bags, backpacks, umbrellas and leather jackets. ColorPrint Extra is great for beginners since it goes on anything, is easy to cut and even easier to weed because of its polyester backing. ColorPrint Extra is designed for use with all types of printer/cutters, Eco-Solvent, Solvent and Thermo Resin.

Designed for use with:
All eco-solvent printer/cutters such as:
Roland SP-300 VersaCamm
Mimaki JV-3
Mutoh
All resin printers, such as;
Roland PC 60 or 600
Gerber Edge
Fargo printers

Use On:
100% polyester
100% cotton
All poly/cotton blends
Nylon
Spandex
Leather

Application:
1. Print and cut design using your choice of software and printer
2. Remove entire sheet from cutter and allow to dry
3. Drive 4-6 hours before weeding or masking
4. Mask image using Digital Mask to remove the image from backing and prepare it for application
5. Preheat garment at temperature of 320F degrees for 4 seconds
6. Position logo on garment
7. Heat apply at 330F degrees for 12-14 seconds, light pressure
8. Peel mask cold

Washing instructions:
1. Wait 24 hours after heat transfer to wash
2. Wash inside out
3. Do not use bleach or other aggressive chemical agents
4. Do not dry clean or tumble dry.

 

For printer profiles, please see http://www.siser.it/prodotti/materiali-per-stampa-digitale/profili-di-stampa.