Siser's original digital material. ColorPrint Classic is a slightly thicker product that can be applied by using a teflon sheet. In most cases, a masking material is not needed unless multiple pieces are being applied together with registration.

Designed for use with:
All eco-solvent printer/cutters such as
Roland SP-300 VersaCamm
Mimaki JV-3
Mutoh

All resin printers, such as;
Roland PC 60 or 600
Gerber Edge
Fargo printers

Use On:
100% polyester
100% cotton
All poly/cotton blends

Application:
1. Print and cut design using your choice of software and printer
2. Wait at least 12 hours for ink to cure and dry before weeding or masking
3. Mask image using Digital Mask to remove the image from backing if necessary for registration
4. Preheat garment at temperature of 302F degrees for 4 seconds
5. Position logo on garment
6. Heat apply at 302F degrees for 10-15 seconds, medium pressure
7. Peel mask cold

 

For printer profiles, please see http://www.siser.it/prodotti/materiali-per-stampa-digitale/profili-di-stampa.