|
| |
|
 Produce photo-quality color transfers with your inkjet printer.
Printing & Transferring Instructions
1. Printing and Preparing Image
- The unprinted (vs. side with back print) surface is the imaging side of the paper.
- Mirror Image before printing design on the paper.
- Check printer settings; single-sheet feeding is recommended.
2. Cut Out Design
- As with any transfer it is recommended to trim the design before transferring.
- For best results use an image with rounded edges to avoid corner liftoff after washing.
3. Preparing for Transfer (Heat Press Application Recommended)
- Prepare heat press at 350-375 degrees F.
- Press fabric first if necessary to ensure flatness, then let cool.
- Place transfer paper with design facing down in desired position on fabric.
- Using above recommended temperature, apply firm pressure for 15-20 seconds.
- HOT peel. Peel the transfer immediately after pressing (Caution transfer will be hot)
Transferring Image using Hand Iron
- Iron on a hard surface, NOT an ironing board. Place a pillowcase or t-shirt between your hard surface and your garment to allow the heat to penetrate the transfer.
- Adjust iron at highest temperature setting – Do not Steam.
- Step press, with firm pressure, slowly along each side of the image. Hold each press for 45 seconds, ensure all edges and corners are firmly pressed. Continue to step press over the entire image, again each step press should be held for 45 seconds until entire image has been presses and all areas have been pressed for 45 seconds each.
Total ironing time should be 5 to 6 minutes for 8.5 x 11 size image.
4. Peel & Wear
- HOT peel. Peel the transfer immediately after pressing (Caution transfer will be hot)
Information and Tips for Best Results
- Use Cotton or poly/cotton fabrics
- Do NOT apply to dark fabrics (use Coastal Ink Jet Opaque)
- Do NOT image this paper in any laser printer or color laser copier or HP desk jet 1200C or 1600C printer
- FOR USE IN INK JET ONLY
- Set Printer to:
i. T-Shirt Transfer reverse image
ii. Normal image quality. Do NOT over saturate with ink
- Trim the image
- Use in a well-ventilated area.
- Leave finished item for at least 24 hours before washing.
- Fabrics may then be machine washed separately (inside out, DO NOT USE BLEACH or bleach additive detergent) in cold water.
- Do NOT use fabric softener
- Dry at normal setting; do not dry clean.
- Keep product in closed package between uses; store in a cool, dry place.
Thank you for choosing Coastal Business Supplies for your ALL your business needs. If there is anything we can do to help please feel free to call and one of our experienced sales staff will be happy to help.
|
|
|
|
SHIPPING
|
|
|
|
|
|
PAYMENT TYPES
|
|
|
|
|
|
