Clear Glass Sublimation Mug - 11oz.

Only %1 left
SKU
21004G

Explore new possibilities with our glass mugs specifically coated for sublimation printing. Pour a lighter color liquid inside your personalized mug and watch your designs come to life! Due to the glass transparency, colors may not look as bright or opaque when mugs are empty.

Specifications:

  • Clear glass mugs for dye sublimation printing
  • Capacity: 11oz.
  • This item is not dishwasher, nor microwave, safe
  • For use with a Mug Press or Mug Wrap

Helpful Resources

Check out our 11oz. pre-designed templates in our Digital Marketplace!

4-in-1 Mug Press

Press Temperature: 340°F
Time: 240 Seconds
Pressure: Medium/Firm

  • Attach sublimation transfer paper with image printed in reverse to the mug with thermal tape
  • Place mug in press at the press temperature, and close the element around it
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds
  • Once done, remove the mug from the press and remove the transfer paper immediately
  • Allow the mug to cool completely before use

 

GeoKnight DK3

Press Temperature: 400°F
Time: 3 - 4 Minutes
Pressure: Medium/Firm

  • Attach sublimation transfer paper with image printed in reverse to the coffee mug with thermal tape
  • Place mug in heat press at the press temperature, and close the element around it
  • Press for the specified time above needed using specified pressure
  • If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
  • Once done, remove the mug from the press and remove the transfer paper immediately
  • Allow the mug to cool completely before use

 

Mug Master Pro Mug Press

Idle Temperature: 380°F
Press Temperature: 385°F
Time: 200 - 220 Seconds
Pressure: Firm

  • Tape the sublimation paper with image printed in reverse to the mug with thermal tape
  • When the heat press reaches the idle temperature, you will hear a beeping sound indicating that the machine is ready
  • Place the coffee mug in the element and close it by pulling the handle towards you
  • Press the green, round button to begin the pressing cycle (temperatures may drop which is normal)
  • Once the press temperature is reached, the timer will begin counting down
  • When the timer reaches 0, take out the mug from the press and remove the transfer paper immediately
  • Allow the mug to cool completely before use

 

Oven Settings

Press Temperature: 400°F
Time: 12 - 15 Minutes
(test in your oven for accurate time)

  • Attach reversed printed image to mug with thermal tape
  • Wrap silicone wrap around mug surface and clasp at handle
  • Place in oven preheated to 400°F for approximately 12 - 15 minutes (test to determine best timing!)
  • Afterwards, remove wrap and transfer immediately
  • Allow the mug to cool completely before use

 

More Information
Manufacturer Coastal
Print Applications Dye-Sublimation, Silicone Wrap
Color Clear
Substrate Material Glass