FR Plastic Name Plate BlanksU5579 FRP Name Plate - Gloss
These FRP blanks will fit 1/8" name plate holders. Sublimatable on both sides - create a formal look for weekdays, and a colorful look for "Casual Fridays."
Pressing time and temperatures are 45 seconds at 400 degress F with light to medium pressure.
Print your picture (make sure to flip it). Place your image face down on top of the name palte , then press. The heat platen on the press will be touching the back of the paper.
These work well using Epson printers with ArTanium sublimation inks and the TruePix or TexPrint papers.(for Sublimation)
After pressing remove paper immediately.
The way that sublimation works is the ink on the sublimation paper when heated to a high temperature turns into a gas. Then the pores on the product open up and allow that gas to enter. Then when the temperature is brought down, the pores close up and the ink is trapped inside. Thus, the image is actually a part of the surface. Meaning it can not be scratched, washed, or peeled off.
Sublimation remains one of the most durable forms of printing on hard surfaces, above transfers and laser methods.
Please note that times and temperatures will vary from press to press.
Please click the link to learn more about the dye sublimation process
|
