|
EverLast Brand heat transfer paper is becoming one of our most popular inkjet heat transfer papers due to the fact that it is very soft and works well on a wide range of fabrics (100% cotton, 50/50, lycra, spandex, jerseys, nylon, rib knit). EverLast transfer paper can be used with a Hand-Iron or Heat Press, resulting in a very soft image that will last longer and feel much softer than traditional inkjet transfers. EverLast paper works in ALL inkjet printers and we have found that it works exceptionally well with our EverLast Heat Transfer Pigment Ink. Click here for information about the EverLast Continuous Ink Systems & Heat Transfer Ink.
Coastal Business Supplies also recommends Coastal Inkjet Opaque (blue grid) for Dark Fabric Applications.
Produce soft/photo-quality color heat transfers with your inkjet printer.
Printing & Transferring Instructions
1. Printing and Preparing Image
- The white unprinted (vs. light blue side) surface is the imaging side of the paper.
- Mirror Image before printing design on the heat transfer paper.
- Check printer settings; single-sheet feeding is recommended.
2. Cut Out Design
- As with any transfer it is recommended to trim the design before transferring.
- For best results use an image with rounded edges to avoid corner liftoff after washing.
3. Preparing for Transfer (Heat Press Application Recommended)
- Prepare heat press at 365-385 degrees F.
- Press fabric first if necessary to ensure flatness, then let cool.
- Place transfer paper with design facing down in desired position on fabric.
- Using above recommended temperature, apply firm pressure for 15-20 seconds.
- This paper can be Hot or Cold peeled.
Transferring Image using Hand Iron
- Iron on a hard surface, NOT an ironing board. Place a pillowcase or t-shirt between your hard surface and your garment to allow the heat to penetrate the transfer.
- Adjust iron at highest temperature setting Do not Steam.
- Step press, with firm pressure, slowly along the entire image.
Total ironing time should be 1 to 2 minutes for 8.5 x 11 size image.
4. Peel & Wear
- HOT or Cold peel.
Information and Tips for Best Results
- Use 100% cotton, 50/50, lycra, spandex, jersey, nylon, rib knit fabric
- Do NOT apply to dark fabrics (use Coastal Ink Jet Opaque)
- Do NOT image this paper in any laser printer or color laser copier or HP desk jet 1200C or 1600C printer
- FOR USE IN INK JET ONLY
- Set Printer to:
i. T-Shirt Transfer reverse image
ii. Normal image quality. Do NOT over saturate with ink
- Trim the image
- Use in a well-ventilated area.
- Leave finished item for at least 24 hours before washing.
- Fabrics may then be machine washed separately (inside out, DO NOT USE BLEACH or bleach additive detergent) in cold water.
- Do NOT use fabric softener
- Dry at normal setting; do not dry clean.
- Keep product in closed package between uses; store in a cool, dry place.
Thank you for choosing Coastal Business Supplies for your ALL your business needs. If there is anything we can do to help please feel free to call and one of our experienced sales staff will be happy to help.
|
