|
Cold Peel T-Shirt Transfer Paper is one of the most popular Cold Peel transfer papers on the market. We have chosen to add Cold Peel T-Shirt Transfer Paper to our products because of its superior washability, soft feel, and ease of application for the retail market. Cold Peel t-shirt transfer paper works in ALL inkjet printers and is formulated especially for use by a hand iron, as always a heat press application will improve durability and washability. (note** Use of a hand iron will not yield the same quality and durability as heat press application.) CLICK HERE for information about HEAT PRESSES.
Neenah's Heat Transfer Paper is Green-e Certified. Click here to read more...
Coastal Business Supplies also recommends Jet Dark Transfer Paper for Dark Fabric Heat Transfer Applications and Jet Light T-shirt transfer paper for use as a hot peel for light fabrics.
Produce photo-quality color heat transfers with your inkjet printer.
Printing & Transferring Instructions
1. Printing and Preparing Image
- The unprinted (vs. side with back print) surface is the imaging side of the paper.
- Mirror Image before printing design on the heat transfer paper.
- Check printer settings; single-sheet feeding is recommended.
2. Cut Out Design
- As with any t-shirt transfer paper it is recommended to trim the design before transferring.
- For best results use an image with rounded edges to avoid corner liftoff after washing.
3. Preparing for Heat Transfer application(Heat Press Application Recommended)
- Prepare heat press at 350-375 degrees F.
- Heat Press fabric first if necessary to ensure flatness, then let cool.
- Place transfer paper with design facing down in desired position on fabric.
- Using above recommended temperature, apply firm pressure for 15-20 seconds.
- COLD peel. Wait for the t-shirt transfer to cool to the touch and then peel the backing paper away(Caution heat transfer will be hot)
Transferring Image using Hand Iron
- Iron on a hard surface, NOT an ironing board. Place a pillowcase or t-shirt between your hard surface and your garment to allow the heat to penetrate the heat transfer.
- Adjust iron at highest temperature setting Do not use Steam.
- Step press, with firm pressure, slowly along each side of the image. Hold each press for 45 seconds, ensure all edges and corners are firmly pressed. Continue to step press over the entire image, again each step press should be held for 45 seconds until entire image has been pressed and all areas have been pressed for 45 seconds each.
Total ironing time should be 5 to 6 minutes for 8.5 x 11 size image.
4. Peel & Wear
- COLD peel. Wait for the transfer to be cool to the touch and peel the backing paper off the substrate (Caution heat transfer will be hot)
Information and Tips for Best Results
- Use Cotton or poly/cotton fabrics
- Do NOT apply to dark fabrics (use Coastal Ink Jet Opaque)
- Do NOT image this t-shirt transfer paper in any laser printer or color laser copier or HP desk jet 1200C or 1600C printer
- FOR USE IN INK JET PRINTERS ONLY
- Set Printer to:
i. T-Shirt Transfer reverse image
ii. Normal image quality. Do NOT over saturate with ink
- Trim the image
- Use in a well-ventilated area.
- Leave finished item for at least 24 hours before washing.
- Fabrics may then be machine washed separately (inside out, DO NOT USE BLEACH or bleach additive detergent) in cold water.
- Do NOT use fabric softener
- Dry at normal setting; do not dry clean.
- Keep product in closed package between uses; store in a cool, dry place.
Thank you for choosing Coastal Business Supplies for your ALL your business needs. If there is anything we can do to help please feel free to call and one of our experienced sales staff will be happy to help.
|
